Kwikset 264 Programming Code (2024)

1. How do I add/delete a user code on my 264 Deadbolt? - Kwikset

  • 1. Enter your Programming Code. ... 3. Enter a new User Code. It must be between 4 and 10 digits. ... 5. Test the code: While your door is open, lock it and enter ...

  • Kwikset.com Home

2. How do I change the Programming Code on my 264 Deadbolt? - Kwikset

  • 1. Enter your existing PC (Programming Code). ... 3. Enter a new PC. It must be between 4 and 10 digits. ... For all programming sequences, success is indicated ...

  • Make sure your door is open and unlocked1. Enter your existing PC (Programming Code).2. Press "Kwikset" then "4" then "Kwikset"3. Enter a new PC. It must be between 4 and 10 digits.4. Press "Kwikset"For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping.

3. Support Information for Satin Nickel 264 Contemporary Keypad Deadbolt

4. Support for Programming Code - Kwikset

  • How do I change the... · How to enable/disable... · On my Smartcode 955, I'm...

  • Kwikset.com Home

5. How do I add/delete a one-time User Code on my 264 Deadbolt? - Kwikset

  • 1. Enter your existing PC (Programming Code). · 2. Press "Kwikset" then "8" then "Kwikset" · 3. Repeat steps 1 and 2 to enable or disable the codes again.

  • Kwikset.com Home

6. How To Change Your Programming Code; How To Add User Codes ...

  • Programming; How To Change Your Programming Code; How To Add User Codes; How To Delete Individual User Codes - Kwikset 264 Installation And User Manual.

  • Kwikset 264 Manual Online: programming, How To Change Your Programming Code, How To Add User Codes, How To Delete Individual User Codes. Important: Before Any Programming Sequence, Make Sure That Your Door Is Open And Unlocked. For All Programming Sequences Below, Success Is Indicated...

How To Change Your Programming Code; How To Add User Codes ...

7. Support for Add One-Time User Code - Kwikset

  • How do I add/delete a one-time User Code on my 264 Deadbolt? A one-time ... Enter your existing Programming Code. 3. Press enter arrow. You will hear ...

  • Kwikset.com Home

8. How to change Auto-Lock time delay on my 264 Deadbolt? - Kwikset

  • 1. Enter your Programming Code. 2. Press “Kwikset” then “6” then “Kwikset” 3. Enter time between 10 and 99 seconds ...

  • Make sure your door is open and unlockedYou can set the Auto-Lock time delay between 10 and 99 seconds.1. Enter your Programming Code.2. Press “Kwikset” then “6” then “Kwikset”3. Enter time between 10 and 99 seconds.4. Press “Kwikset”For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping.

9. How do I enable/disable autolock on my 264 Deadbolt? - Kwikset

  • The Auto-Lock feature automatically re-locks your door 30 seconds after unlocking. This feature is off by default. ... 1. Enter your existing Programming Code. 2.

  • Kwikset.com Home

10. How to program codes with kwikset smart code deadbolt

  • 8 mei 2013 · I have a kwikset smart code deadbolt with z-wave. It connected to smartThings with out a problem, I can use it with smart apps and manually ...

  • I have a kwikset smart code deadbolt with z-wave. It connected to smartThings with out a problem, I can use it with smart apps and manually unlock and lock the door with it. The instructions say that when you connect the lock to z-wave you can add up to 30 different codes to it. In one of Alex’s demo videos, he also says how you can program codes right from the app. My question is, how do you do this? I can’t seem to find anywhere to program codes remotely from the SmartThings app or anywhere el...

How to program codes with kwikset smart code deadbolt

11. On my 264 Deadbolt, the Kwikset button flashes red 3 times

  • Enter door handing code and test lock on page 7 here. 3. No User Code programmed, or User Codes are disabled. You need to program at least one User Code, or re- ...

  • Kwikset.com Home

Kwikset 264 Programming Code (2024)
Top Articles
Latest Posts
Article information

Author: Clemencia Bogisich Ret

Last Updated:

Views: 5916

Rating: 5 / 5 (80 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Clemencia Bogisich Ret

Birthday: 2001-07-17

Address: Suite 794 53887 Geri Spring, West Cristentown, KY 54855

Phone: +5934435460663

Job: Central Hospitality Director

Hobby: Yoga, Electronics, Rafting, Lockpicking, Inline skating, Puzzles, scrapbook

Introduction: My name is Clemencia Bogisich Ret, I am a super, outstanding, graceful, friendly, vast, comfortable, agreeable person who loves writing and wants to share my knowledge and understanding with you.